About Pyro Systems 2000

PyroSystems2000 for the professional pyrotechnician:

The Pyro Systems 2000 is a completely new developed system to control fireworks.

It is designed for automatic and manual fireworks control and for professional use.

Automatic control is achieved by programming individual time codes for the different channels. In addition a list of manual channels can be programmed which are fired by the pyrotechnician life during the show.

It consist of a Pyro Master connected over a serial bus line to several Pyro Slaves.

The Pyro Master is the microcomputer based controlling unit.
With a keyboard and a display as the user interface all the programming is done in a few steps.
Fireworks shows with up to 256 different channels and a duration up to 3 hours can be programmed.
In addition to the automatic control, a SMPTE code based synchronization of the fireworks show to any video or audio signal is possible.

The Pyro Slaves are the microcomputer based "launching" units to which the individual fuses are connected. 
Over a 2 wire serial bus line the communication between the Pyro Master and the Pyro Slaves is setup. Each Pyro Slave produces its ignition energy supply, either 12V dc or 100V dc, out of its own battery.

There is no "energy transportation" over the bus line; only the commands and data are send, therefore a total cable length of 1000m (3300ft.) is possible.

The communication line and the correct functionality and cabling of all fuses is checked before the fireworks show to guarantee the firing of all fuses and achieving the best performance for all effects.

More infomation could be found in the product overview (WORD-document ~ 512kBytes)

If you want to see what is currently available, have a look at the product line

If you want to get the latest information about Pyro Systems 2000 and to learn about our future plans write an E-Mail to:

last modified