| Pyro Master PM
2000 |
 |
The Pyro Master is a microprocessor based fireworks controller.
The Pyro Master is the control unit for modern fireworks.
With already 128 independent channel in the smallest version (PM 2001
light) and the possibility to connect up to fifteen Pyro Slaves to one
Pyro Master there are no restriction for a perfect fireworks show.
With a large illuminated LCD display and a 19 key keyboard it is easy
to program and control the fireworks show:
(Picture of the german PM 2001 firmware version. Of course
there is an english version available too)
Four functions are presented by the Pyro Master:
-
F1 automatic fireworks
Each channel could be programmed to a time between 0:00.1s and 179:59.9s
with a resolution of 100 ms. Either by control of the internal clock or
an external SMPTE signal the channel is fired.
-
F2 list of manual channels
A list of channels manually fired live during the fireworks show can
be programmed.
-
F3 test of all channels
The communication to the Pyro Slaves, the correct channel programming
and the function of each electric match is tested before the show starts.
-
F4 this is the fireworks control
With the red "START" button on the remote control the fireworks show
is started. Each channel is fired exactly at the programmed time or by
pressing the black "FIRE" button on the remote control
The active function is shown with a green LED. In case of a running fireworks
show the F4-LED is blinking.
To learn more about the Pyro Master here is an online
version of the manual.
 |
last modified
|
|